Page 1 of 6
PR3217 FISHING ROD HOLDER
INSTRUCTIONS
FIRST TIME INSTALLATION
•
Please read instructions carefully before installation.
•
Check the contents of kit. Contact your Prorack dealer if any parts appear to be missing or damaged.
•
Clean your roof racks prior to fitting the Fishing Rod Holder.
IMPORTANT WARNING!
IT IS CRITICAL THAT ALL PRORACK RACKS AND ACCESSORIES BE PROPERLY AND SECURELY ATTACHED TO YOUR VEHICLE. IMPROPER ATTACHMENT COULD RESULT IN
AN AUTOMOBILE ACCIDENT, AND COULD CAUSE SERIOUS BODILY INJURY OR DEATH TO YOU OR TO OTHERS. YOU ARE RESPONSIBLE FOR SECURING THE RACKS AND
ACCESSORIES TO YOUR CAR, CHECKING THE ATTACHMENTS PRIOR TO USE, AND PERIODICALLY INSPECTING THE PRODUCTS FOR ADJUSTMENT, WEAR, AND DAMAGE.
THEREFORE, YOU MUST READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS SUPPLIED WITH YOUR PRORACK PRODUCT PRIOR TO INSTALLATION OR
USE. IF YOU DO NOT UNDERSTAND ALL OF THE INSTRUCTIONS AND CAUTIONS, OR IF YOU HAVE NO MECHANICAL EXPERIENCE AND ARE NOT THOROUGHLY FAMILIAR
WITH THE INSTALLATION PROCEDURES, YOU SHOULD HAVE THE PRODUCT INSTALLED BY A PROFESSIONAL INSTALLER SUCH AS A ROOF RACK SPECIALIST.
09-13-585 Rev 2
TOOLS REQUIRED
•
10mm Spanner or Torque Wrench (for P-Bar fitment only)
KIT CONTENTS
Item #
Component
Qty
1
M6 Spring Nut
4
2
M6 Slot Nut
4
3
M6 Nylock Nut
8
4
M6 Spring Washer
4
5
M6 Washer
8
6
M6 Button Head Capscrew 20mm
4
7
M6 Button Head Capscrew 12mm
4
8
Clamp Plate For P-Bar
2
9
M6 Button Head Capscrew 40mm
8
10
Fishing Rod Holder Zip Strap
2
11
Fishing Rod Holder Body
2
12
Screwdriver Allen Key 4mm
1
4
5
6
8
1
9
3
2
11
10
12
7
