Fitting Kit
EN
K991
●
Apply protective tape as shown.
●
Carefully remove ditch mould at the front
position with flat-head screwdriver.
●
Unhook rubber ditch mould from plastic
retaining clip (A) and double sided tape (B).
Lift ditch mould up and out of the channel.
●
Completely remove from the vehicle.
●
The rubber ditch mould is to be re-installed
on the vehicle later.
●
Turn rubber ditch mould over.
●
Place on a workbench.
From the bottom, cut 3/4 of the way
through the rubber ditch mould as shown.
Blade should contact steel strip.
10
