Fitting Kit
EN
K508
●
Use two M5 x 12 mm self tapping screws to
secure the assembly onto the leg.
●
Do not over tighten.
Fitment
●
Apply protective strip as shown.
Trim if required.
●
Locate two holes at each position along the
inside of the roof rails.
●
Ensure the two pins of the clamp engages
correctly with the holes in the roof rail.
●
Place crossbars approximately above
these holes on roof rails.
●
Place one hand on the leg and apply
downward pressure.
●
Slide clamp through opening in leg.
9
