background image

K421 ASSEMBLY AND FITTING INSTRUCTIONS 

Page 

4

 of 

4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Warning Notes:

 

 

 

Use these instruction in conjunction with crossbar instructions 

 

 

WARNING: Check the Tightness of Screws Regularly

 

 

Check crossbars feel tight. 

2.5 

 

Completed roof rack. 

2.6 

Summary of Contents for K421

Page 1: ... these instructions also applicable for Whispbar Flush Bar Whispbar Through Bar pictured in these instructions also applicable for Whispbar Flush Bar Whispbar Through Bar pictured in these instructions also applicable for Whispbar Flush Bar When Fitted and loaded correctly 75 75 75 75 kg kg kg kg Maximum Whispbar Load Rating 1 Fitting Feet Assemblies to Legs Remove crossbar and this kit parts from...

Page 2: ... from leg Detach Parts removed from each leg Turn the crossbar upside down and use the M6 x 12 mm capscrews to secure the feet assembly using the Hex Screwdriver supplied with the crossbar Repeat on all for legs Select four feet assemblies and match the left and right assemblies to the left and right roof rack legs Use the M5 x 12 mm self tapping screws to secure feet assemblies to leg 1 5 1 4 1 3...

Page 3: ...mp and the leg Tighten the red plastic knob Do Not Over Do Not Over Do Not Over Do Not Over Tighten Tighten Tighten Tighten Ensure the red plastic knob is in the position above and refit covers Repeat for all four legs 2 2 2 3 2 1 Locate two holes at each position along the roof rail Place crossbars approximately above these holes on roof rails 2 4 Pins engaged correctly Opening for clamp 2 Positi...

Page 4: ...ND FITTING INSTRUCTIONS Page 4 of 4 Warning Notes Use these instruction in conjunction with crossbar instructions WARNING Check the Tightness of Screws Regularly Check crossbars feel tight 2 5 Completed roof rack 2 6 ...

Reviews: