K421 ASSEMBLY AND FITTING INSTRUCTIONS
Page
3
of
4
•
Slide clamp through opening in the leg
(see step 2.1).
•
Ensure that the two pins of the clamp
engage correctly with the holes in the roof
rail.
•
Thread the coach bolt through the clamp
and the leg.
•
Tighten the red plastic knob. Do Not Over
Do Not Over
Do Not Over
Do Not Over
Tighten
Tighten
Tighten
Tighten.
•
Ensure the red plastic knob is in the position
above and refit covers.
•
Repeat for all four legs.
2.2
2.3
2.1
•
Locate two holes at each position along the roof
rail.
•
Place crossbars approximately above these
holes on roof rails.
2.4
Pins engaged
correctly
Opening for
clamp
2. Positioning Crossbars on Roof Rail
