4
Step 4.
Connect the male plug to the
unplugged female plug.
It should be noted that during the
insertion a characteristic click of the
fastened snap / clasp is created. This
will guarantee us the certainty of the
connection.
Step 5.
Connect the female plug with the
previously unplugged male plug,
then connect the cable to the VP
Chip Box.
Attach the Chip Box in a
safe place, away from the hot engine.
After correct installation, you can start
the engine and start driving.
3
Step 3.
Unplug the plug from the socket.
To unplug the connector, press the
clasps and then pull. Always pull the
plug not wires!
Remember! Attempting to pull out
the plug without first unclipping the
clasps can cause it to tighten even
more tightly. Before unplugging the
plug, it is good to push it into the
socket to loosen the clasps.
5
9
