Thanks for purchasing the Propur™ ProMax™ Shower Filter. Take a shower with the
new Propur™ high efficiency ProMax™ shower filter with massage head and
experience the difference
. Features 4 stage filtration process utilizing new RF
water filter element technology. Helps protect your skin from unhealthy effects of
contaminants that may be in your water. Independent lab test shows the
ProMax™ shower filter helps reduce over 200 contaminants including VOC’s,
heavy metals, pesticides, Chloramines, chlorine, fluoride, herbicides,
pharmaceuticals and odor. Helps control scale, algae and bacteria. The
ProMax™ comes with a triple function swivel massage shower head rated at 2.5
gpm. The ProMax™ is made from ABS plastic and is PBA free. Best operated at 80
psi and 115º F.
1) Installation
1. Remove your ProMax™ Shower Filter assembly from the package and
set aside.
Please note:
the ProMax™ comes completely assembled with filter
cartridge installed in housing and massage head attached.
2. Remove the existing shower head from the showerarm (pipe)
by unscrewing it counter clockwise.
Do not unscrew the shower arm.
3. Install the ProMax™ shower filter assembly by
turning it clockwise onto the shower arm. Hand
tightening is all that is needed.
DO NOT OVERTIGHTEN OR CROSS THREAD.
2) Activation
1. Adjust the shower head so that it points down for now as the first few
minutes of water may contain carbon fines which need to be flushed out
of the filter before using.
2. Turn on cold water for about 3-5 minutes. You will see an initial rush of
carbon in with the water. Once the water is clear, you can swivel the
shower head to flush the grey water down the shower floor drain. Loose
media fines that have flushed out from the shower filter are normal.
3. To activate, turn off the shower, then turn back on. You are now ready
to adjust the water to the desired temperature and rotate the shower
head to the desired position. The ProMax™ Shower Filter is now ready to
use.
introduction
