8.
Fasten the control box and hand switch to the table top. Make sure the control box and hand switch are fastened in a location where all
the cables will connect without being in tension. Be sure to use approved screws per the table top supplier.
9.
Connect the motor cables to the control box. The motor cable plug-connection has to click into place.
Connections to the control box:
M1-M2 = Connectors for the columns.
HS = Connectors for the handset.
AC = Connector for the power cord (3-pin).
10.
Connect the hand switch (HS) cable to the control box.
A S S E M B L Y I N S T R U C T I O N S
proproffice.com 6
P E R C H A D J U S TA B L E H E I G H T B E N C H S Y S T E M
