Page 14
Step 7-
For Safety, the Jumping Mat and Safety Enclosure are
sewn together as one piece. Unfold the Jumping Mat/Safety
Enclosure Combo and locate the small Pole Sleeves sewn near
the top of the Enclosure Netting. Slide one Sleeve over the top
of each Enclosure Pole so the Enclosure is hanging loosely in
position over the Frame.
Step 8-
Find the zippered opening on
the Enclosure and locate the Bungee
Loop below the right end of the
Enclosure zipper. Feed a Bungee
through the Bungee Loop and attach
it to the Frame as shown in the
depictions on the next page.
