13
Step 4 - Lay the Mat (9) on the ground. Make
sure the two warning decals (not shown) are
on top of the Mat.
Step 5 - Unfold enclosure to a large rectangle
laying on the ground. Locate the zipper open-
ing. (Please ensure zipper is facing out).
Step 6 - Lay enclosure on mat. There is a
red thread at the bottom of the door opening.
Locate button hole by red thread and insert
the v-ring on the mat through that button
hole. Working left; insert each v-ring through
matching button hole until all 108 button
holes and v-ring are assembled.
Step 7 - Lift mat and enclosure assembly and
place inside trampoline main frame. Locate
doorway v-ring with red thread. Count left 9
v-rings, attach Stay- Lock end of a spring to
this v-ring.
See figure center right.
Caution: We recommend wearing leather
gloves while attaching the Springs. Be care-
ful where you place your hands as the Springs
and frame joints can pinch.
Step 8 - Locate spring slot nearest upright
square slot T-bracket (B). Attach other end of
the spring to this frame spring slot. Count 18
v-rings and 18 frame spring slots from first
spring and attach your next spring. Repeat the
18 spring distance until you have attached 6
springs. Continue following this pattern until
all springs are attached.
As you attach the Springs, carefully count the
V-rings and frame holes. If a V-ring or hole
is skipped, back-up to the misalignment and
reattach the Springs in their proper position.
V-Rings
V-Rings
Stay-Lock end
of spring
(Attach to V-Ring)
Spring end
(Attach to Frame)
11
11
11
11
D
V-Rings
