10
ASSEMBLY
IMPORTANT ASSEMBLY INFORMATION
● You will need a Phillips screw driver (not included), and two adjustable
wrenches (not included) to assemble this Trampoline and Enclosure Com-
bination.
● Assembly requires two adults.
● Wear gloves to protect your hands from pinch points during assembly.
● To extend the life of your product, a thin film of oil has been applied to
all metal parts. Therefore, you should wear clothing and gloves, during
assembly, which will not be damaged by any slight oil residue or stain.
When product is completely assembled, all metal parts with oil film will
be covered.
TRAMPOLINE PLACEMENT
● Place the Trampoline and Enclosure Combination on a level surface to
assemble and use it.
● Adequate overhead and lateral clearance is imperative. Place the Tram-
poline and Enclosure Combination away from walls, structures, fences,
sidewalks, and other play areas.
A minimum of 24 feet (7.3 meters) of overhead clearance is required. This
space must be free from all wires, tree limbs, and any other potential haz-
ards. Always have a clear space of at least 6 feet (1.8 meters) on all
sides of the Trampoline and Enclosure Combination.
