•
Installation must be carried out by a qualified installer i.e. AV technician.
•
The installation of the cables must be carried out in a dry place and sealed tightly with the
8 screws provided. Failure to do this will void your warranty.
•
The VESA screws provided should be the only screws used with the Proofvision Outdoor
TV, for spares please contact Proofvision directly.
•
Please make sure the wall chosen to install on is of a substantial nature and that rust proof
fixtures are used.
•
We strongly recommend the Proofvision screen is not installed in DIRECT SUNLIGHT
for long periods of times. The units top operating temperature is 60 Celsius and the unit
can reach this temperature if exposed to direct sunlight over a long period of time.
Never tamper with any of the components, or any other adjustment controls not mentioned in this
manual.
The LED panel used in this product is made of glass. Therefore, please take care it can break when
the product is dropped or applied with impact. When you are cleaning the panel, make sure the
power cord is pulled out from the plug receptacle. Then wipe the receiver with a dried soft cloth.
All technical work on the TV should only be performed by an electrician, due to the high voltage.
