Pronto M61, Owner'S Operator And Maintenance Manual

Page: 41 / 80

SECTION 7—SEAT
Part No. 1139640
41
Pronto® M61™with SureStep®
Adjusting Seat Depth
NOTE: For this procedure, refer to FIGURE 7.4.
1. Remove the seat. Refer to Removing/Installing the Seat Assembly on page 40.
2. Remove the six mounting screws located under the seat that secure the seat back
assembly in place.
3. Adjust seat back assembly to desired position and reinstall the six mounting screws.
Securely tighten.
NOTE: Refer to Detail “A” of FIGURE 7.4 for proper seat depth positions. For example, to achieve
maximum seat depth, the front mounting hole on the seat back bracket aligns with the third hole
on the seat base.
4. Reinstall the seat base onto the seat assembly. Refer to Adjusting Seat Position on Seat
Base on page 43.
5. Reinstall the seat. Refer to Removing/Installing the Seat Assembly on page 40.
FIGURE 7.4 Adjusting Seat Depth
Mounting
Holes
Mounting Screws
Seat Back
Seat Back Bracket
Seat
Base Seat Depth Seat Size
40 cm 40 X 46 cm
40 cm 46 X 46 cm
46 cm 51 X 51 cm
46 cm 56 X 51 cm
Minimum Seat Depth
Seat Depth Seat Size
43 cm 40 X 46 cm
43 cm 46 X 46 cm
48 cm 51 X 51 cm
48 cm 56 X 51 cm
Middle Seat Depth
Seat Depth Seat Size
46 cm 40 X 46 cm
46 cm 46 X 46 cm
51 cm 51 X 51 cm
51 cm 56 X 51 cm
Maximum Seat Depth
DETAIL “A” - SEAT DEPTH POSITIONS