SECTION 4—SAFETY INSPECTION/TROUBLESHOOTING
25
❑
Check that all labels are present and legible. Replace if necessary.
Inspect/Adjust Weekly
❑
Seat is secured to wheelchair frame.
❑
Seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑
Seat release latch is not worn and is functional. Replace if necessary.
❑
Inspect tires for flat spots and wear.
❑
Check pneumatic tires for proper inflation.
❑
Ensure arm pivot points are not worn and/or loose. Replace if necessary.
Inspect/Adjust Monthly
❑
Ensure wheel mounting nuts are secure on drive wheels.
❑
Ensure no excessive side movement or binding occurs when drive wheels are lifted
and spun when disengaged (freewheeling).
❑
Inspect caster assembly has proper tension when caster is spun. Caster should come
to a gradual stop.
❑
Loosen/tighten caster locknut if wheel wobbles noticeably or binds to a stop.
❑
Ensure all caster/wheel/fork/headtube fasteners are secure.
❑
Inspect for any loose hardware on the wheelchair.
❑
Inspect the seat positioning strap for signs of wear. Replace if worn or damaged.
❑
Ensure that the buckle on the seat positioning strap latches. Replace if necessary.
❑
Verify that the hardware that attaches the seat positioning strap to the seat frame is
secure and undamaged. Replace if necessary.
❑
Make sure elevate operates smoothly and properly.
❑
Make sure elevate systems drive with reduced speed when seat is in elevated position.
Inspect/Adjust Periodically
❑
Ensure wheelchair rolls straight (no excessive drag or pull to one side).
❑
Inspect electrical components for signs of corrosion. Replace if corroded or damaged.
❑
Ensure arms are secure but easy to release and adjustment levers engage properly.
❑
Ensure adjustable height arms operate and lock securely.
❑
Ensure arm pivot points are not worn and/or loose. Replace if necessary.
❑
Ensure armrest pads sit flush against arm.
❑
Ensure seat and/or back upholstery have no rips and do not sag. Replace if necessary.
❑
Ensure seat release latch is not worn. Replace if necessary.
