PRONAR T669XL, Operator'S Manual, Page: 34 / 135

Pronar T669XL, Pronar T700XL SECTION 2
2.10
•
The trailer can only be stood on when it is absolutely motionless and the tractor
engine is switched off. Tractor and trailer should be immobilized with parking
brake and chocks should be placed under the trailer wheels. Ensure that
unauthorised persons do not have access to the tractor cab.
•
Regularly check the condition of nut and bolt connections, in particular
connections of drawbar eye with drawbar and wheel nuts.
•
Regularly service machine according to schedule defined by Manufacturer.
•
Before beginning work requiring raising of load box, it must be emptied and
secured by supports to prevent accidental falling. The trailer must at this time be
hitched to the tractor and secured with chocks and parking brake.
•
Before beginning repair works on hydraulic or pneumatic systems reduce oil or air
pressure completely.
•
Servicing and repair work should be carried out in line with the general principles
of workplace health and safety. In the event of injury, the wound must be
immediately cleaned and disinfected. In the event of more serious injuries, seek a
doctor's advice.
•
Repair, maintenance and cleaning work should be carried out with the tractor
engine turned off and the ignition key removed. Tractor and trailer should be
immobilized with parking brake and chocks should be placed under the trailer
wheels. Ensure that unauthorised persons do not have access to the tractor cab.
•
During maintenance or repair work, the trailer may be unhitched from tractor, but
it must be secured with chocks and parking brake. During this work the load box
may not be raised.
•
Should it be necessary to change individual parts, use only those parts indicated
by the Manufacturer. Non-adherence to these requirements may put the user and
other people's health and life at risk, and also damage the machine and invalidate
the warranty.
•
Before welding or electrical work, the trailer should be disconnected from the
power supply. The paint coating should be cleaned. Burning paint fumes are
poisonous for people and animals. Welding work should be carried out in a well lit
and well ventilated space.