PRONAR T669XL, Operator'S Manual, Page: 33 / 135

SECTION 2 Pronar T669XL, Pronar T700XL
2.9
2.1.6 TYRES
•
When working with tyres, the trailer should be immobilised with parking brake and
secured against rolling by placing chocks under wheel. Wheels can be taken off
the trailer axle only when the trailer is not loaded.
•
Repair work on the wheels or tyres should be carried out by persons trained and
entitled to do so. This work should be carried out using appropriate tools.
•
Inspect tightness of wheel nuts after the first use of the trailer, every 2 - 3 hours
during first month of work and then every 30 hours of use (travel). The inspection
should be repeated individually if a wheel has been removed from the wheel axle.
Wheel nuts should be tightened according to recommendations provided in
section 5 MAINTENANCE.
•
Avoid potholes, sudden manoeuvres or high speeds when turning.
•
Check the tyre pressure regularly. Pressure and tyres should be also checked
during the whole day of intensive work. Please note that higher temperatures
could raise tyre pressure by as much as 1 bar. At high temperatures and
pressure, reduce load or speed. Do not release air from warm tyres to adjust the
pressure or the tyres will be underinflated when temperatures return to normal.
•
Protect tyre valves using suitable caps to avoid soiling.
2.1.7 MAINTENANCE
•
During the warranty period, any repairs may only be carried out by Warranty
Service authorised by the manufacturer. After the expiry of the warranty period it
is recommended that possible repairs to the trailer be performed by specialised
workshops.
•
In the event of any fault or damage whatsoever, do not use the trailer until the
fault has been fixed.
•
During work use the proper, close-fitting protective clothing, gloves, protective
goggles and appropriate tools.
•
Any modification to the trailer frees the manufacturer from any responsibility for
damage or detriment to health, which may arise as a result.