PRONAR T046H, User Manual

Page: 37 / 116

Chapter 2
2.7
PRONAR T046H
Safety of use
recommended by the manufacturer.
Failure to comply with these require-
ments may endanger the health or
life of bystanders or persons oper-
ating the trailer, cause damage to the
machine and constitute the basis for
loss of warranty.
• Before welding or electrical work, the
trailer should be disconnected from
the power supply. The paint coating
should be cleaned. The fumes of
burning paint are poisonous to
humans and animals. Welding work
should be carried out in a well-lit and
ventilated room.
• During welding work pay attention
to flammable or fusible elements
(elements of pneumatic, electrical,
hydraulic systems, elements made
of plastic). If there is a risk of ignition
or damage, they must be removed or
covered with non-flammable material
before welding. Before starting work,
it is recommended to prepare a CO
2
or foam extinguisher .
• In the event of work requiring the
trailer to be raised, use properly cer-
tified hydraulic or mechanical lifts for
this purpose. After lifting the machine
use stable and durable supports. It
is forbidden to work under a trailer
raised only with a jack.
• It is forbidden to support the trailer
with fragile elements (bricks, hollow
614-F.01-1
1
2
2
Figure 2.1 Laying the locking wedges
(1) wedge, (2) wedge pocket