PRONAR PUV-1400, Operator'S Manual, Page: 11 / 66

SECTION 1 PUV-1400
1.3
Serial number is stamped on the data plate. Data plate is located on the left mouldboard.
When buying the machine, check that the serial number corresponds with that indicated in
the WARRANTY BOOK, in the sales documents and in the OPERATOR'S MANUAL.
1.2 INTENDED USE
PUV-1400 snowploughs are designed for clearing road surfaces, squares, parking spaces
and all other hard road and footpath surfaces such as asphalt, concrete paving blocks,
paving, concrete. The use of the snowplough for other purposes should be regarded as
improper. Depending on the equipment, the snowploughs can be mounted on agricultural
tractors and other slow-moving vehicles that meet the requirements set out in Table 1.1.
Using it as intended also involves all actions connected with the safe and proper operation
and maintenance of the machine. Due to the above, the user is obliged to:
•
carefully read the OPERATOR'S MANUAL and comply with its recommendations,
•
understand the machine's operating principle and how to operate it safely and
correctly,
•
comply with general safety regulations while working,
•
prevent accidents,
•
comply with road traffic regulations.
The machine may only be used by persons, who:
•
are familiar with the contents of this publication and with the contents of the Operator's
Manual of the agricultural tractor (carrying vehicle),
•
have been trained in machine operation and safe working conditions,
•
have the required authorisation to drive the vehicle and are familiar with the road traffic
regulations and transport regulations.