PRONAR PRONAR 5110, Operator'S Manual

Page: 85 / 122

SECTION 6: MAINTENANCE
6-3
SERVICE INSPECTION PROGRAMME
Table 6-1
Service inspection after (engine
hours):
PC P-2 P-3 P-4
Operati
on No
Service operation
(10*) (250) (500) (1000**)
1 Check oil level in engine X X X X
2 Check level of liquid in engine cooling system X X X X
3 Check liquid level in front screen spray tank X X X X
4 Check level of liquid in a hydraulic brakes and clutch
control system
X X X X
5 Remove condensation from pneumatic system tank X X X X
6 Check and remove deposits (contamination) from
preliminary decanter and fine fuel filter and fuel tank
X X X X
7 Check tension of fan and alternator drive belt. X X X X
8 Check engine, steering system, brakes and remaining
systems and assemblies of tractor
X X X X
9 Change oil and oil filter in engine X X X
10 Change insert in fuel pre-filter X X X
11 Check oil level in gearbox and rear axle and change oil
filter in gearbox
X X X
12 Check oil level in front axle drive body and reducers X X X
13 Check oil level and change oil filters in hydraulic system X X X
14 Check and adjust brake system X X
15 Check tightening of wheel hub bolts of front and rear
wheels
X X X
16 Check technical condition of tyres and pressure in tyres X X X
17 Check quick coupler oil release container X X X
18 Check battery X X
19 Engine air filter service X X
20 Check cab air filter X X
21 Change insert in fine fuel cleaning filter X X
22 Clean radiator X X
23 Change oil and oil filter in hydraulic system X
24 Change oil and oil filter in gearbox and rear axle X
25 Change oil in front axle drive body and reducers X
26 Check nut and bolt connections of tractor assemblies
(external) X
27 Check injectors and injector pump of fuel system X
General service (as necessary)
28 Checking and adjustment engine valve play
29 Change bulbs
30 Road lights adjustment
31 Checking front axle wheel convergence
* - or daily **- or every 2 years, depending on which comes earlier
ATTENTION ! Service inspection intervals expressed in engine hours may not be exceeded by more
than 10 engine hours.
ATTENTION: Tractor must be washed before each service inspection.