PRONAR GP200, Operator'S Manual

Page: 25 / 66

SECTION 2 PRONAR GP200
2.5
•
Do not transport the branch cutting saw set in the working position.
•
The branch cutting saw may not be used or transported in conditions of limited
visibility.
•
Do NOT ride on the machine or transport any materials on it.
•
Before using the machine always check its technical condition, especially in terms
of safety. In particular, check the technical condition of the linkage, guards, circular
saw blades and hydraulic system connections.
•
Reckless driving and excessive speed may cause accidents.
•
When driving on public roads, always put the transport protective guard on the
circular saw blades.
2.1.5 MAINTENANCE
•
During the warranty period, any repairs may only be carried out by warranty service
authorised by the Manufacturer. It is recommended that necessary repairs to
machine should be undertaken by specialised workshops.
•
In the event of any fault or damage whatsoever, do not use the branch cutting saw
until the fault has been fixed.
•
During work, use the proper, close-fitting protective clothing, gloves and
appropriate tools. When working on hydraulic system it is recommended to use oil
resistant gloves and protective goggles.
•
Any modification to the branch cutting saw frees PRONAR Narew from any
responsibility for damage or detriment to health, which may arise as a result.
•
Before undertaking any work on the branch cutting saw, turn off the tractor/carrying
vehicle engine and wait until all rotating parts come to a stop.
•
Regularly check the technical condition of the safety devices and correct tightening
of bolt connections.
•
Regularly perform service inspections of machine as recommended by the
Manufacturer.
•
Do NOT perform maintenance or repair work under raised and unsupported
machine.