background image

Warranty

Promotal warrants, to the original purchaser, products manufactured by Promotal and components to be free 
from defects in materials and workmanship for a period of two (2) years

*

 from the date of purchase.

Obligations

Promotal will, at its discretion and expense, replace defective parts reported to Promotal within the applicable 
warranty period, and which, upon examination by Promotal, prove to be defective.
In accordance with CE regulation, Promotal’s distributor is responsible for after sales service during and after 
the warranty period.

Exclusions

 

- This warranty does not extend to :

 

 

(1) Spare parts and consumables.

 

 

(2) Travel and labour expenses.

 

 

(3) Breakdowns due to improper use, manifest neglect, or to moving the device.

 

 

(4) Equipment whose original characteristics have been changed by the user.

 

 

(5) Control units, hydraulic and electric jacks if opened by the user (seals broken).

 

 

(6) Damage, breakdowns, failures, or defects attributable to outside causes (lightning,  

 

 

electric surges, floods, natural catastrophes, impacts, etc.) or to the presence of foreign 

 

 objects.

 

 

(7) Damage caused by improper hook-up or by the power supply, damage caused by 

 

 

corrosion or by gradual deterioration of the product.

 

 

(8) Indirect damage related to loss of use and penalties generated by poor performance.

 

 

(9) Aesthetic damage incurred by the outside parts of the equipment, which does not 

 

 

hinder proper operation, such as scratches, chips, and scrapes.

 

 

(10) Devices whose serial number has been rendered illegible or has been changed or 

 

 removed

Exclusive Remedy

Promotal’s only obligation under this warranty is the replacement of defective parts. Promotal shall not be 
liable for any direct, indirect, special, incidental, exemplary, or consequential damages or delay, including, but 
not limited to, damages for loss of profi ts or lose of use.

No Authorization

No person or fi rm is authorized to create for Promotal any other obligation or liability in connection with 
the products.

THIS WARRANTY IS PROMOTAL’S ONLY WARRANTY AND IS IN LIEU OF ALL OTHER 

WARRANTIES, EXPRESS OR IMPLIED.

Upholstery sets are warranted 1 year from manufacturing defaults.

Warranty Information

User’s Guide  

19

Summary of Contents for 73





















Reviews: