User’s Guide
17
Safety note
When using the position memory function, movements can be interrupted by pushing
on one of the command buttons for the DM or, as a last resort, by disconnecting the
power supply cord.
Adjusting the height
(up)
Adjusting the height by holding
the button down
Adjustment of electric
footrests
(15630-01 & 15640-01)
(up)
Adjusting the height by holding
the button down
Adjusting the backrest
angle
(up)
Adjusting the height by holding
the button down
Adjusting the height
(down)
Adjusting the height by holding
the button down
Adjusting the backrest
angle
(down)
Adjusting the height by holding
the button down
Adjustment of electric
footrests
(15630-01 & 15640-01)
(down)
Adjusting the height by holding
the button down
Positions QE1, QE2, QE3
This positions can be completely
controlled by the user. At the
touch of a button (push)
Default position
Standard position for getting into
and out of the DM (H: 57cm) at
the touch of a button (push)
NB: This position cannot be
altered
QE = Quick Exam
Foot pedal
Technical information :
Type of EI: Radio Frequency (Frequency 2.4G) IEEE802.15.4 standard
Mob.: between 5 and 6 metres
Presentation
Safety note
When using pre-programmed positions
(reception, QE1, QE2, QE3)
,
do not leave the patient on the DM unattended.
Remark:
This foot control operates with two (2) LR03 - AAA Alkaline 1.5V batteries.
In the event of malfunction, these batteries will have to be replaced.
(See page
50: REPLACING USED BATTERIES IN THE FOOT PEDAL
Summary of Contents for 156 01 Series
