30.08.2017
5
SHERIFF-1 premium
ELECTROMECHANICAL LOCK
INSTALLATION MANUAL
ADDITIONAL FIXATION SET
1. APPLICATION
The additional fixation set is designed for mounting Electromechanical lock "Sheriff-1 premium" on the metal, plastic, wood and
other doors with the door stop width from 0 to 25.5mm and the thickness of the door leaf 45-70mm.
2. DELIVERY SET
1. Left angular bracket with hole pattern
1 pc.
2. Right angular bracket with hole pattern
1 pc.
3. Bolt
М
8
х
35 for deadbolt fixing
1 pc.
4. Screw
М
4
х
8
4 pcs.
5. Nut
М
4
4 pcs.
6. Locking washer for
М
4
4 pcs.
7. Installation manual
1 pc.
3. INSTALLATION OF THE LOCK
Mounting of the lock depends on the door stop width A (see next page). Drill in specified location (see Table 1, 2) of the
angular bracket 5 holes in diameter 4.2...4.7mm: for fixing to the lock bracket (2 pc.), for power cable (1 pc.), for fixing to the door
frame (2 pcs.). Fix with screws angular brackets and the lock bracket. Fasten the brackets to the lock. Fix the lock to the door
frame. Plug the lock, mark and mount the deadbolt to the door in accordance with the Operating Manual.
In all versions of lock mounting it is necessary, that the distance between the door and the lock case will be from 10 to 13.5mm. The
length of the locking bolt, established for the distance from the door to the lock case - 10mm, is 26.5 mm. When the distance is more,
adjust the length by unscrewing the locking bolt. Herewith the length of the locking bolt should not be more than 31mm (see Fig. 1)!
The length of the bolt
М
8
х
60 for the deadbolt fixing (without head) should be less than the thickness of the door on 3-7mm
(shorten the bolt if needed).
Fig. 1. The length of the locking bolt
Engineering & Technical Center PROMIX, LLC
Russia , 214030, Smolensk city, Krasninskoye Hwy, 35
Tel. (4812) 619-330
www.itc-promix.ru
Please send us all your comments and suggestions concerning our products via e-mail:
.
Thank you in advance!
26.5
÷
31
