Promix-SM213
6
Do not transfer the lock to the closed state until you make sure that the
required clearances are provided!
Before mounting the lock in the prepared opening, remove one red sticker from
its body; the sticker is on the bottom surface of the lock in the mounting
position! The sticker covers an opening for water drain from the lock. Remove
white protective film from the locking plate and the lock.
Example of the lock installation in the door frame of a plastic door.
Example of the lock installation in the leaf of a wooden door.
For mounting the lock, drill 4 holes 2-2.5 mm in diameter for self-tapping screws and the locking plate,
30-32 mm in diameter for lock mounting.
Water drain
opening
(bottom view)
Locking plate
Locking plate
Locking plate