Promise Technology, Inc. VSkyCube c10X Hardware Guide
2
c
ontinUe
to
d
eploy
VS
ky
c
Ube
c
10X
After rack-mounting the VSkyCube c10X device, please follow the instructions in the
VSkyView & VSkyCube Quick Start Guide
(located on the
Utility CD
) to connect it to the network, power it on, and continue the deployment.
LED Information
LED Status
Description
Power
Steady Green
Power is on.
Off
Power is off.
UID
Steady Blue
System identifier function is active.
Off
System identifier function is disabled.
System Health
Steady Red
System alert, system operation is not normal.
Off
System operation is normal.
Front Control Panel
Disk Activity
Blinking Green
One or more HDD are active (read/write activity).
Steady Green
One or more HDD are connected.
Steady Red
One or more HDD has failed.
Off
No HDD are detected.
PSU Status
Steady Green
PSU is on and function is normal.
Steady Amber
•
PSU module fault/protection in operating mode (failure, OCP,
OVP, Fan Fail, OTP, UVP)
•
AC power cord not connected
Power LED on Disk Carrier
Steady Blue
HDD is powered on.
Off
HDD is not receiving power or no HDD installed
Activity LED on Disk Carrier
Steady Green
HDD is active.
Blinking Green
Read/write activity in process on HDD.
Steady Red
HDD has failed.
Off
HDD is not receiving power or no HDD installed.
Enclosure Information
Product Dimension
710 mm x 430 mm x 43.5 mm
Product Weight
(including installed HDDs) 20.30 Kg
1. For both sliding rail assemblies, release and detach the
inner member from the slide.
2. Attach the inner member of the sliding rail assembly to each
side of the VSkyCube c10X device.
3. Fix the outer member of the rail assembly to the rack frame.
4. Carefully insert the VSkyCube c10X device to complete the
installation.
i
nStall
in
rack
VSkyCube c10X devices install in a standard 19” equipment rack using the mounting rails shipped with the device.
Follow these steps to install the mounting rails in an equipment rack.
