PROMISE
TECHNOLOGY, INC.
10
9
Choose “Yes” when asked if you want to restart your computer. Be
sure to eject the diskette from drive A:.
Driver Confirmation
To confirm that the driver has been properly loaded, choose “Settings”
from the “Start” menu. Choose “Control Panel,” and then double-click on
the “System” icon. Choose the “Device Manager” tab, and then click the
“+” in front of “SCSI controllers.” “Promise Technology, Inc.,
ULTRA66
IDE
controller” should appear.
Windows NT
If you’re installing Ultra66 under Windows NT 3.51, create a floppy disk
titled “Windows NT 3.51 Ultra66 Drivers.” Copy the following files onto
the root directory of the diskette: “TXTSETUP.OEM” and
“OEMSETUP.INF” from the “NT351” directory of the “Ultra66 Driver”
diskette; and “ULTRA66.SYS” and “DISK1” from the root directory of the
“Ultra66 Driver” diskette. When prompted for drivers during the installa-
tion of Windows 3.51, insert this diskette in drive A:.
Under Windows 4.0, insert the “Ultra66 Driver” diskette in drive A: when
prompted for the drivers.
Installing Drivers During Windows NT 3.51/4.0 Installation
1
Start the system installation by booting from the Windows
NT
disk:
a) Floppy install:
boot the system with the Windows NT installa-
tion diskettes.
b) Floppyless install:
boot from floppy and type “WINNT /B”.
After files have been copied, the system will reboot. On the
reboot, press the “F6” key when the message “Setup is inspect-
Section 3
