Promise Technology Pegasus R4 Product Manual Download Page 56

Page: 56 / 148

Pegasus R6, R4 Product Manual

Choosing Automatic Configuration

To use the Automatic Configuration Wizard:

From the Storage menu choose

Wizard

Click the

Automatic

button.

The Automatic Configuration dialog box appears. See Figure 6.

Figure 6. Automatic Configuration dialog box

Do one of the following actions:

•

If you agree with the proposed configuration, click the

Submit

button.

The Wizard creates your disk array and logical drive. If you have a
Pegasus R6, the Wizard also creates a spare drive.

•

If you do NOT agree with the proposed configuration, click the
Dashboard icon, click the

Click here to create one

link, and then click

either the

Express

Advanced

button.

Method

User Options

Suggested for
users who are

See

Page

Automatic

None

New to data storage

Express

General parameters

Familiar with data storage

Advanced

Individual parameters

Data storage professionals

Summary of Contents for Pegasus R4





















































































































































Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands

Promise Technology Pegasus R4, Product Manual

Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands