Promise Technology Pegasus R4 Product Manual Download Page 57

Page: 57 / 148

Chapter 3: Management with the Promise Utility

Choosing Express Configuration

To use the Express Configuration Wizard:

From the Storage menu choose

Wizard

Click the

Express

button.

The Express configuration dialog box appears. See Figure 7.

Figure 7. Express Configuration dialog box

Check the boxes to choose any one or a combination of:

•

Redundancy

– The array remains available if a physical drive fails

•

Capacity

– The greatest possible amount of data capacity

•

Performance

– The highest possible read/write speed

•

Spare Drive

– A hot spare drive (Pegasus R6 only)

•

Mixing SATA/SAS Drive

– Not applicable

In the Number of Logical Drives field, type the number of logical drives you
want to make from this disk array.

Pegasus supports 1 to 32 logical drives.

From the Application Type dropdown menu, choose an application that best
describes your intended use for the logical drives.

•

File Server (default)

•

Video Stream

•

Transaction Data

•

Transaction Log

•

Other

Click the

Next

button to continue.

The Summary dialog box appears with information on the disk arrays, logical
drives, and spare drives you are about to create. See page 50, Figure 8.

Summary of Contents for Pegasus R4





















































































































































Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands

Promise Technology Pegasus R4, Product Manual

Search results

Summary of Contents for Pegasus R4

Reviews:

Related manuals for Pegasus R4

Brands by name

Popular brands