Step 4: Create an Array
Appendix A of the FastTrak SX4000 User’s Manual contains an explanation
of RAID Levels. If you are new to RAID, you may wish to read about it
before creating your first array.
1. Boot your computer and watch for the Promise FastTrak SX4000 BIOS
to appear (below).
Figure 2.
FastTrak BIOS Screen.
2. Press Ctrl-F to open the Configuration Utility. The Main Menu appears
(below).
Figure 3.
Array Utility Opening Screen.
3. Use the FastBuild utility to create at least one array on the drive(s)
attached to the FastTrak SX4000 card.
Select
View/Define Array... [ 2 ].
The Define Array screen appears
(below).
