ProMinent ProMix Series, Operating Instructions Manual, Page: 23 / 68

Pr o Minent ProMix
‘DB' & 'PB’ Polymer Feeder
ProMix Series MA Batch/Inline User Manual
23
2.3 Adjust Setpoint
Key down to PolymerFeed and Key ENTER . Local
Setpoint controls the feed when the enclosure door switch
is in the Local position. Displays current setpoint.
Key ENTER to adjust.
Key RIGHT to move the cursor &
UP or DOWN to change the digit.
Key EXIT to abandon or ENTER to execute.
Displays current, revised setpoint.
If enclosure door switch is in the Local position,
feed rate will change immediately.
Local Setpoint limits are 0.05 to 1.00% for emulsion
polymer and 0.05 to 10.0% for Mannich.. If entries are
made outside of these limit ranges the configured setpoint
will default to either the maximum or minimum limit.
However, these values must be accepted by pushing the
Enter key which also turns off the alarm.
Key ENTER to return to main menu.
LocalSetpoint
0.33%
Adjust Setpoint
Editing, or Exit
0.42%
LocalSetpoint
0.42%
then
LocalSetpoint
Out of Range
Fault response
9
9 PolymerFeed
Feed @ 8.74%
PolymerFeed
Feed @ 8.74% 9