ProMinent ProMix Series, Operating Instructions Manual, Page: 22 / 68

Pr o Minent ProMix
‘DB' & 'PB’ Polymer Feeder
ProMix Series MA Batch/Inline User Manual
22
2.2 Main Menu (continued)
Mixer displays ON when the mixer motor is running.
Alternates with "ENTER = Flush" for mix chamber
flushing when manually selected.*
If the Feed Verify option is selected Feed Verify ensures
that polymer is flowing into the mixer. The mixer STOP s if
Feed Verify faults. Displays polymer volume fed from
midnight.
RemoteSetpoint displays the % concentration as a function
of the remote 4-20 mA signal & controls the PolymerFeed
pump when Remote is selected. A RemoteSetpoint less
than 0%, typically an open current loop, STOP s the feeder.
Press ENTER to span the current loop.
Pump Speed displays the 4-20mA output which
tracks the percentage PolymerFeed pump rate .
Typically spanned 0-100% pump speed = 4-20mA.
Press ENTER to view-adjust the current loop.
Customer Analog can be selected to display pump speed
or pump GPH (scalable)
Top of Main Menu.
You can always key EXIT until you get to this screen
*If the System Start switch is placed in OFF position or if the
switch is in the REMOTE position and the remote start
contact is opened for longer than 2 seconds, the controller
will initiate a flush cycle.
Feed Verify
ON 2745 mL
RemoteSetpoint
0.37%
Pump Speed
8.42mA 27.6%
Polymer 0.37%
Remote RUN
Mixer
ON 1.34hrs 5
G
C
Customer Analog
8.42mA 27.6%
D