6
Assembly and installation
n
User qualification, mechanical installation: trained and qualified
Chapter 2.2 ‘User qualification’ on page 8
n
User qualification, electrical installation: Electrical technician,
Chapter 2.2 ‘User qualification’ on page 8
6.1 Reactor
A2292
Fig. 5: Reactor
I. Inlet
II. Outlet
6.1.1 Assembly
NOTICE!
Maintenance work
Leave adequate clearance for maintenance work.
The required clearance for maintenance work, e.g.
replacing lamp protection tubes, can be found in
Fix the reactor in place with appropriate fixing material (pipe clamp,
frame). The fitting position can, in principle, be chosen at random
and, if required, can be adapted to conditions on site.
6.1.2 Attaching the Warning Sign and Nameplate to the Reactor
NOTICE!
Attach the self-adhesive warning label supplied to
the reactor so that it is clearly visible.
Attach the “Caution UV radiation” warning sign and the “160°
opening angle” label directly adjacent to the sensor con‐
nector.
Fitting position
Assembly and installation
21