4
Information on the system
4.1
Application
The Ultromat
®
AF/ATF manufactured by ProMinent is a polyelec‐
trolyte preparation system.
4.2
Design
Almost all commercially available polymers can be used.
Concentrations of 0.05 to 0.5 % can be set. The viscosity of the
polymer solution produced may not exceed 1500 mPas. Please
refer to the application data sheets of the polymer suppliers for
information about the viscosity of the different polymer solutions.
Adjust the flow rate of the preparation water to make full use of the
preparation chamber. Concentrations of greater than 0.5 % can
reduce the capacity of the preparation performance.
The maturing time available for the production of a polymer solu‐
tion depends on the discharge quantity and the volumetric capacity
of the Ultromat
®
and is approximately 60 minutes at a maximum
discharge rate.
4.3
System dimensions
System dimensions
Please refer to the dimensions sheet for the precise
dimensions of the individual Ultromat
®
system!
Ultromat AF
400
1000
2000
4000
6000
8000
Reservoir
content (litre)
400
1000
2000
4000
6000
8000
Chamber
volume (l)
133
333
666
1333
2000
2666
Discharge
rate (l/h)
400
1000
2000
4000
6000
8000
Maturing time
(min)
60
60
60
60
60
60
Dimensions
LxWxH (mm)
1742x905x87
6
2396x970x12
26
3095x1155x1
377
3081x1433x1
923
3936x1682x1
924
4377x1895x1
929
Net weight
(kg)
140
350
400
550
850
1150
Total weight
(kg)
540
1350
2400
4550
6850
9150
Overflow
connection
DN 40
DN 50
DN 50
DN 65
DN 65
DN 80
Discharge
connection
DN 25
DN 25
DN 32
DN 40
DN 40
DN 50
Water supply
for redilution
1"
1"
1"
1 1/2"
11/2"
2"
Information on the system
13
