8
ASSEMBLY INSTRUCTIONS
10
10. Insert blade through slot in the side of the motor
assembly. Align the holes of one blade with three blade
screw holes in underside of the motor assembly. Secure
with the three blade screws and blade washers. Repeat
this step for the remaining blades.
11. Remove one of the three fitter plate screws
preassembled to the fitter plate and loosen the other
three but do not remove. Feed the single-pin connector
through the center hole in the metal shade. Align the
keyhole slots in the metal shade with the loosened
screws in the fitter plate. Turn metal shade clockwise and
replace the previously removed fitter plate screw. Tighten
all screws.
11
Blade Washer
Fitter Plate
Single-pin
Connector
Fitter Plate Screw
Blade Screw
Blade
Slot
Mounting Bracket Screw
9. Slide the top of the motor assembly over the mounting
bracket, aligning the slotted holes in the top of the
motor assembly with the pre-loosened mounting
bracket screws in the mounting bracket. Twist the motor
assembly clockwise to lock. Then, re-insert the mounting
bracket screws and securely tighten all screws.
9
Keyhole
Slot
Metal
Shade
Single Pin
Connector
Light Kit
Light Kit
Screw
Metal
Shade
Keyhole
Slot
12. Remove one of the light kit screws preassembled to
the metal shade and loosen the other two screws but do
not remove. Connect the single-pin connectors from the
fitter plate to the single-pin connectors from the light
kit -- blue to blue and white to white. Align the keyhole
slots in the light kit with the loosened screws in the metal
shade. Turn light kit clockwise and replace the previously
removed light kit screw. Tighten all screws.
Single-pin
Connector
12
Light Kit
Summary of Contents for Eclora 51672
Page 1: ......