6
ASSEMBLY INSTRUCTIONS
7
5
6
5. Feed the wires coming from the yoke through the yoke
cover, canopy and out through the top of the downrod.
6. Insert the downrod into the yoke and reinstall the
downrod pin and downrod clip. Then retighten the two
set screws.
Note:
With wires extending out of the downrod,
measure 8 inches of lead wire and cut the excess wire
with wire cutters (not included). Then strip 1/2” of
insulation from the end of each wire.
Downrod
Canopy
Yoke Cover
Downrod Pin
Set Screw
Yoke
Downrod
Downrod Clip
Yoke
7. Then, lift the downrod into the mounting bracket.
Rotate the downrod until the tab in the mounting bracket
is seated in the slot in the downrod ball.
WARNING:
The fan should not rotate in the mounting
bracket if installed correctly. Failure to align the slot in the
downrod ball with the tab on the mounting bracket may
result in fan falling causing serious injury or death.
Mounting
Bracket
Tab
Slot
Downrod
Summary of Contents for 50880
Page 1: ......