ACTIVslate XR Quick Start Guide
9
4.
Register your ACTIVslate
a.
Windows users, in the ACTIVslate Controller select
Register.
Mac users, select the ACTIVslate tab from the ACTIV board
Preference Panel.
The Registration Program will open.
b.
Windows users only, you cannot register the ACTIVslate until the
hardware and software combination is approved for use in your
country. Click on the drop down arrow and select the Country in
which you are using the ACTIVslate.
If permitted, you can then continue with registering your
ACTIVslate. If your hardware and software combination is
not permitted, a warning will be displayed and you will be
blocked from using the ACTIVslate. In this case, or if your
country does not appear in the list, contact Technical
Support for advice.
c.
Select a
Channel
and
System
ID
from the drop down boxes.
d.
Select the
Register
Button in the Registration Program.
e.
Use the ACTIVpen to select the
Register Button
on the
ACTIVslate.
f.
Enter a PIN Number, which the program will display, pressing the
ACTIVpen on the appropriate Mode Boxes on the ACTIVslate.
The registered ACTIVslate will be displayed in the registered
device window.
g.
Close the Registration Program. The ACTIVslate Controller will
now show the registered ACTIVslate.
ACTIVslate XR Quick Start Guide
9
4.
Register your ACTIVslate
a.
Windows users, in the ACTIVslate Controller select
Register.
Mac users, select the ACTIVslate tab from the ACTIV board
Preference Panel.
The Registration Program will open.
b.
Windows users only, you cannot register the ACTIVslate until the
hardware and software combination is approved for use in your
country. Click on the drop down arrow and select the Country in
which you are using the ACTIVslate.
If permitted, you can then continue with registering your
ACTIVslate. If your hardware and software combination is
not permitted, a warning will be displayed and you will be
blocked from using the ACTIVslate. In this case, or if your
country does not appear in the list, contact Technical
Support for advice.
c.
Select a
Channel
and
System
ID
from the drop down boxes.
d.
Select the
Register
Button in the Registration Program.
e.
Use the ACTIVpen to select the
Register Button
on the
ACTIVslate.
f.
Enter a PIN Number, which the program will display, pressing the
ACTIVpen on the appropriate Mode Boxes on the ACTIVslate.
The registered ACTIVslate will be displayed in the registered
device window.
g.
Close the Registration Program. The ACTIVslate Controller will
now show the registered ACTIVslate.