Connect
Step 6: Turn on your equipment
1.
Turn on your display and/or projector and ensure the correct
input is selected. Your ClassFlow Connect reads the size
of your display during its first startup, so you should always
have your display on the correct source before starting your
ClassFlow Connect for the first time.
2.
Press the power button on your ClassFlow Connect device.
The first time you use ClassFlow Connect you will be asked
to digitally sign the End User License Agreement. This can be
simply selected on the interactive display or you can use a
keyboard and mouse to assist.
NOTE:
Never force a connector into a port. Check for
obstructions on the port. Always make sure the connector
matches the port and that you have positioned the connector
correctly in relation to the port.
Configure
Configuring your device
To configure your ClassFlow Connect you must have the
administrator password for your device.
DEFAULT PASSWORD: admin
Select for the menu, then select
Settings
and enter the
administrator password.
12
ClassFlow Connect Installation & User Guide