Promax SATHUNTER, Manual

Page: 42 / 80

SATHUNTER USER’S MANUAL.
Page 10 09/2008
The top line of this screen is the same one for all functions of the equipment.
Next it will be explained the icons and messages that can appear depending on the
situation.
At the top left corner it is shown the active function. There are three different
options: 1) DETECT, 2) IDENTIFY and 3) ADJUST.
When using the instrument, it may appear on the display some messages and
icons depending on the situation at that time. These are detailed below:
Message Description
"LOW BATTERY"
-
"VERY LOW BATTERY"
The equipment will be switched off automatically.
"LNB SHORT CIRCUIT"
The LNB can be shortcut.
"LNB OVER CURRENT"
The LNB has a high consumption.
"MANUAL POWER OFF"
The instrument has to be switched off by hand
"AUTO POWER OFF"
The instrument will switched off after five minutes of
inactivity
"SERVICE MODE"
-
"BATTERY MODE"
-
"UPDATE MODE"
-
“NETWORK NOT FOUND”
-
“SERVICES NOT FOUND”
-
"LNB NOT DETECTED"
Power level is below the minimum necessary to detect a
LNB (this value can be adjusted by software, usually 10 %)
"FULL BATTERY"
-
"MPEG-2 NOT DETECTED"
It is not detecting the Transport Stream signal MPEG-2
"LOADING NETWORK"
-
"LOADING SERVICES"
-
"NO SIGNAL"
The equipment does not detect signal (power signal below
30 dBµV)
"HIGH TEMPERATURE"
The running temperature is too high. The equipment must
be switched off for a while. If the problem persists, contact
with the technical support.