Promax PROPOWER - 5, User Manual

Page: 76 / 122

USER’S MANUAL. PROPOWER-5
Page 28
07/2006
To print the stored measurement select the PRINT field, previously consult
section 4.3 Connecting to a computer or a printer .
PROPOWER-5
LOGGER NUMBER 10
DATE: 08:55 12-09-2004
CHANNEL PLAN: IBER
UNITS: dBm
THRESHOLD: OFF
NOISE FREQ.: BW/2
CHAN FREQ PWR C/N
UL12 3.25
16 52
DL13 3.25 13 33
UL14 3.25 -10 15
UL1 3.75 -15 18
DL4 4.37 20 44
UL5 6.50 -18 20
DL6 6.50 11 34
DL12 6.75 19 >37
UL13 6.75 20 >42
DL14 7.37 -13 10
UL7 7.75 -16 13
DL8 7.75
Figure 32.- Example of print.
4.2.6.1 Datalogger configuration.
From the LOGGER mode, when
pressing the CONFIG key [14] we will accede
to the configuration menu. This menu permits
to modify the
THRESHOLD and MEASURES
parameters. To accede to them turn the rotary selector
and once the parameter we want to change is
appears shadowed, press it; then turning it its
value will be modified. Finally press it again to
validate the new value.
a) THRESHOLD: It activates / deactivates the measurement threshold.
This parameter allows to carry out the logger function in an agile way, by
activating only those measures we consider significative.
In the
OFF mode (deactivated) all measurements are taken (with a level
higher than 0 dBm). On the other hand, when a level is defined, only those
channels with a level higher than the
THRESHOLD value will be measured.
b) MODE: It defines the types of measurements to be taken.
This parameter allows to select the measurements that are desired to made
between:
- POT : Potencia detectada en el conal digital PLC
- POT/CN : Level and Carrier to Noise ratios.
Figure 33.- Logger configuration menu.