USER’S MANUAL. PROMAX-10
Premium
Page 42
05/2004
ANALOGUE CHANNELS
DIGITAL CHANNELS
Level
Audio /
Video
Ratio
Carrier /
Noise
Ratio
Power
MER
BER
LEVEL / POWER
Yes
-
-
Yes
-
-
AV - C/N / MER
Yes
Yes
Yes
Yes
Yes
-
AV-CN / MER-
BER
Yes
Yes
Yes
Yes
Yes
Yes
(*)
(*) Note:
The BER measurements represent an increase of the data acquisition time.
IMPORTANT
To leave the configuration menu of the DATALOGGER mode, just press the key of
the operating mode you wish to access.
4.3
Connection to a Computer or Printer.
The PROMAX-10
Premium
permits the connection to a PC or to a serial printer
for data transfer, by means of the connection cable model CC-208.
Do not connect any cable other than that supplied by the manufacturer,
otherwise serious damage may be caused to the equipment.
1) Prior to connecting the equipment to a PC, disconnect both from their
respective power supplies.
2) Connect the end of the connection cable corresponding to the PROMAX-10
Premium
to connection [8] and the other end to the serial port of your
computer or printer.
Once the computer or printer have been connected, select on the PROMAX-10
Premium
the LOGGER operation mode. If PRINT function is selected data will be
dumped to the remote unit through the serial port.
The communication parameters used by the PROMAX-10
Premium
, and which
therefore must be defined on the remote unit (PC or printer) are the following:
Rate
19200 bauds
Data bits
8 bits
Parity
None
Stop bits
1
