Promax PROFI-70, Manual

Page: 59 / 94

USER’S MANUAL. PROFI-70
05/2008
Page 21
En
g
lis
h
************************
* PROFI-70 *
************************
00:01:38 01-01-2007
PWR: -46 dBm
SNR: 34 dB
CH: C06
SSID: SMC
MAC: 0004E2CFFB8*
Figure 10.- Example of print.
The symbol ( * ) next to the MAC data, is used to state encrypted channels in the
printed measurement report.
4.2.4 SCAN operation mode
The SCAN operation mode shows the level of each of the active channels in the
channel plan through a bar graph on the display , within a frequency interval of
100 MHz, corresponding to the 14 channels from ISM band. Additionally, it numerically
shows the channel level indicated by the floating marker, as well as the number of
transmitting stations that have been detected in that channel and in the whole frequency
band.
To access the SCAN operating mode menu from any operating mode ( CONFIG ,
SETUP , LOGGER , etc.) press the direct access button to go directly to the main menu.
Later, select the SCAN [F4] option from the lower selection box.
Figure 11. - Scan Function
The selected input to measure, appears indicated in the superior part of the
display by means of the symbol
S
.