Promax GV-198, Manual

Page: 47 / 72

E
n
g
lis
h
TV generator GV-198
01/2004 Page 17
5 MAINTENANCE
5.1 Replacing the mains fuse
The fuseholder lid is placed in the mains base (see figure 1).
To substitute the fuse, disconnect the power cord.
With an appropriate screw driver remove the fuseholder lid.
Substitute the melt fuse for another of the following characteristics:
IMPORTANT
FUSE TYPE SHOULD BE: 5 x 20 mm., 250 V, F, and:
250 mA FOR ALL VOLTAGES
AVOIDING THIS DIRECTIONS COULD DAMAGE THE
EQUIPMENT.
When inserting the fuseholder lid be careful that the voltage selector is in the
correct position according to the mains.
5.2 Cleaning recommendations
CAUTION
TO CLEAN THE COVER, TAKE CARE THE INSTRUMENT IS
DISCONNECTED.
CAUTION
DO NOT USE SCENTED HYDROCARBONS OR CHLORIZED
SOLVENTS. SUCH PRODUCTS MAY ATTACK THE
PLASTICS USED IN THE CONSTRUCTION OF THE COVER.
The cover should be cleaned by means of a light solution of detergent and
water applied with a soft cloth.
Dry thoroughly before using the system again.