FM
87.80
Seek
MHz
This is the
Normal Screen
for FM Radio operation. This screen shows signal
strength, radio operating mode (Seek, Preset, Tune etc.) battery condition,
channel frequency and any RDS information available.
Seek Mode
The default display shows the Seek Mode. To access the Seek Mode menu
during normal radio operation, press the
Back Button
and turn the
Control
Wheel
to <Seek Mode> and press the
Select Button
to enter Seek Mode.
Turn the
Control Wheel
to search for FM stations automatically. Turn the
Control
Whee
l clockwise to seek in a frequency increasing direction and anti-clockwise
to seek in a frequency decreasing direction.
When the search function finds a radio station, it will stop and broadcast
automatically.
31
Preset Mode
The Preset Mode is used to store the desired stations (30 stations at most).
When under the Seek Mode, Preset Mode, or Tune Mode, press the
Select
Button
, to enable a quick channel selection box. Turn the control wheel to
select accordingly.
Under the Seek Mode, Tune Mode, or Channel List, choose the desired stations
and press the
Select Button
, it will show channel selection box, turn the
Control
Wheel
to select a channel and press the
Select Button
for about 2 seconds.
System will store the station. At the same time, the station will flash twice to
show it has been stored successfully. After it has been done, system will back
to the interface of original mode, as below:
Channel List
Channel List is generated by the Auto Program function (described below). The
Channel List will be updated each time you select Auto Program.
Channel List with pre-listening function, when move to a different radio station,
the system will play the corresponding radio programs. Select the desired radio
station and press the
Select Button
, the system will switch to Seek Mode and
broadcast it. If there are the same radio stations in the preset list, it will show the
32
10 1.20
5.104.90MHz
Preset
4.103.00MHz
3.101.20MHz
FM
87.50
Seek
MHz
Promate(左对齐).indd 32-33
2009-12-9 8:52:42
