background image

6

they break.

Always check to make sure the area 

where screws are being driven or 

where holes are being drilled does 

not have any hidden wiring. Contact 

with a “live” wire will make exposed 

metal parts of the tool “live” and 

could result in an electric shock to 

the operator.

Do not drive screws or break into 

existing walls or other blind areas 

where electrical wiring may exist. If 

this situation is unavoidable, remove 

all fuses or disconnect all breakers 

feeding the work area.

Secure the workpiece in a vice or 

with clamps. Never hold it in your 

hand or across your legs. The 

rotating action of the driver may 

cause the bit to come loose from the 

screw and cause injury.

Never carry the cordless driver with 

your  finger  on  the  switch. The  tool 

is always in an “ON” condition when 

the battery is charged.

Never hold the body of the cordless 

driver near the switch while 

changing bits. Accidentally touching 

the switch may start the tool and 

possibly cause an injury.

Always use the correct shape of 

screwdriver bit that matches the 

head of the screw.

Always  use  the  largest  size 

screwdriver  bit  that  will  properly  fit 

into the head of the screw.

Do not use worn or damaged 

screwdriver bits. Worn or damaged 

screwdriver bits will not drive the 

screw properly and may jump out 

of the screw head, causing possible 

injury and damage to the workpiece.

BATTERY 

AND 

CHARGER 

SAFETY

WARNING:  Only  use  the  charger 

supplied  with  this  kit  to  charge  the 

battery.  Charging  any  other  batteries 

may damage the charger and possibly 

cause serious injury.

The battery pack for this driver is 

contained within the main housing 

of the tool. Never attempt to open 

the battery housing for any reason. 

If the battery housing breaks or 

cracks, immediately discontinue use 

and do not recharge.

Do not charge the battery if the 

battery housing is wet or shows any 

evidence of corrosion.

A small leakage from the battery 

may occur under extreme usage, 

charging or temperature conditions.

This does not indicate a failure. 

However, if the outer seal is broken 

and this leakage gets on your skin, 

follow these steps:

Summary of Contents for PRO-SD480

































Reviews: