PROMAG
DF7XX
REV.C
11
4. LED / Buzzer Settings
Enable RS232 Command Set Control: (For 19200,n,8,1 Only)
RS232 LED/Buzzer command set frame as below:
STX
J
NUMBER (0~9)
CR
02h 4Ah
30h~39h
0Dh
Command Table:
NUMBER
Descriptions
0 (30h)
All LED Off, Buzzer Off
1 (31h)
Green LED ON
2 (32h)
Green LED OFF
3 (33h)
Red LED ON
4 (34h)
Red LED OFF
5 (35h)
Buzzer Beep once
6 (36h)
Buzzer Beep 3 Times
7 (37h)
Green LED ON with Beep once
8 (38h)
Red LED ON with Beep 3 Times
9 (39h)
All LED ON (Orange)
Remark:
If “Enable RS232 Command Set Control (for LED/Buzzer)” checkbox is checked, the
external LED/Buzzer control with high/low level control will be disabled.
