Promac 378VTE, Manual

Page: 4 / 27

2
1. Unpacking
Before unpacking, make sure the carton configuration not damaged, broken or parts extruded,
if any above defect case is found, contact your retailer to change a new one as soon as
possible.
Unpacking procedure:
1-1. Carefully open the carton. (Pull it from the bottom to the top)
1-2. Take out and read the manual, check parts list and relative attachments.
1-3. Inspect the machine outline if it is in normal condition or not. Crack, rust, collapse and separate are
strictly prohibited.
1-4. Cleaning the surface of the machine.
1-5. Assemble the drill machine based on manual, instruction guide.
2. Transportation instruction
2-1. Please refer to instruction manual in specification and machine weight to arrange handling manner. Be
sure to use capable fork – lifter or hoist to lift of machine.
2-2. The handling and transportation shall be carried out by qualified persons.
2-3. Fork – lift or hoist can be used in handling and shall be operated by qualified driver.
2-4. While transportation, keep attention to the balance of machine.
2-5. During handling, the machine shall be lifted only in vertical direction.
2-6. Before handling, make sure all movable parts are secured in their position and all movable accessories
should be removed from machine.
2-7. The steel rope should average pull the machine head, table and column tightly.
2-8. Keep all the processes in a carefully and slightly condition.
2-9. Bump or crash are strictly prohibited. It will cause precision shift and electronic controller damaged.