11
9. Operation illustration and procedure
9-1. There are four T grooves in the worktable. It is used to fix the work piece.
9-2.There is a T grooves in the base, too. It is convenient for fixing the longer, heavier and larger working
piece.
(Option)
9-3.
These machines have special design for tapping, a quick change device. During tapping, if you want
spindle to turn reversely and withdraw tapping tip, just pull up grip handle only (as shown in Figure 12.) If you
want to continue to operate, just press down grip handle. (as shown in Figure 13.)
9-4.Protect safety guard shall be allocated in a proper position in operation. It is controlled by a micro witch.
Figure 12 (For CE)
Figure 12
Figure 13
Lock
Loose
Summary of Contents for 378VTE
Page 23: ...21 378VTE Exploded View 378VTE...
