- 12 -
or replace the HEPA filter.
Clean and replace the Air Inlet filter
1.
Open the dust container cover by rotating the cover counterclockwise. (Fig 12)
2. Pull the top inlet HEPA filter from the container by rotating it counterclockwise to unlock it, and then pull it up
and out of the unit. (Fig 12)
3. Clean the filter by knocking the dirt loose, cleaning with compressed air or using warm water, then allow the
filter to air dry completely. Once the filter has completely air dried, then assemble the filter back into the
container. Or, if the filter is too dirty or in an unusable condition, replace the filter with a new one.
Clean and replace the exhaust HEPA filter
1. Open the exhaust cover by rotating in count clockwise. (Fig 13)
2. Put the exhaust HEPA out of the unit. (Fig 13)
3. Clean the filter by knocking the dirt loose, cleaning with compressed air or using warm water, then allow the
filter to air dry completely. Once the filter has completely air dried, then assemble the filter back into the
container. Or, if the filter is too dirty or in an unusable condition, replace the filter with a new one.
Fig 13
