- 8 -
scratching or scarring of the surface. Always test a surface in a area that cannot be seen before use.
CARPET/FLOOR BRUSH
The Prolux 2.0 includes a specially designed floor tool that can be
used on any surface without switching attachments. Easily
transition between high pile carpets, low pile carpets and hard floor
surface, with the Carpet/Floor Brush. (Fig 6) To vacuum hard
floor surfaces press the button on the floor tool and soft bristles will
snap out. When ready to vacuum Carpet or Throw Rugs press
the other buttons and the bristles will retract.
1.
Insert the handle (Fig. 3/1) into the upper end
of the telescopic tube (Fig 3/2).
2.
Attach the floor nozzle (Fig. 3/3) to the bottom
end of the telescopic tube (Fig 3/4).
NOTE: Shove all the way together and firmly twist to the right to connect pieces.
3.
Adjust the length of the telescopic tube. Press down the release latch on the tube to do this (Fig. 4/1).
Then pull the handle of the telescopic tube to extend it to your desired length (Fig. 3/1). Let go of the release
catch while pulling until it locks in place. You will hear a distinct click.
Fig 3 Fig 4 Fig 5 Fig 6
n
MANUAL SUCTION CONTROL
Your vacuum cleaner includes a manual variable suction control on the flexible hose handle. The suction power
can be adjusted by moving the suction regulator to the desired position between open and closed. (Fig7)
Open gives you less suction, closed provides maximum suction. For example, less suction is required on
upholstery and draperies compared to thick carpets, which required maximum suction.
