- 12 -
(Fig 12)
Clean and replace the exhaust filter
1. Open the exhaust cover by rotating it counterclockwise. (Fig 13)
2. Pull the exhaust filter out of the unit. (Fig 13)
3. Clean the filter, using warm water and allow the filter to air-dry completely, and then assemble the filter back
into the unit. Or, if the filter is too dirty or in an unusable condition, replace the filter with a new one.
(Fig 13)
Cleaning the Housing
WARNING
: Always switch off the appliance and disconnect it from the outlet before cleaning it. See section "Switching
Off and Retracting Power Cord.”
ATTENTION
: Do not use Alcohol, cleaning or scouring agents to clean your machine, as these may damage the
appliance. Clean the outside of the housing using only a slightly damp washcloth.
